Gold Reach Expands on Significance of High Grade Breccia Intersections, reports zone open to the North and West, Porphyry Zone open to the South and releases Further Results


November 21, 2006

Vancouver, British Columbia: Gold Reach Resources Ltd. (GRH: TSX-V) ("Gold Reach" or the "Company") announces the assay results for 15 drill holes completed at the Seel property, located 120 km south of Houston, British Colombia and 8 km from the active copper producer, Huckleberry Mines Ltd. Twelve of the fifteen holes returned significant copper results +/- Au and Ag values. The best intersection contained 0.845 % Cu and 23 grams per tonne of Ag over 138 metres, including 1.24% Cu and 32 grams per tonne of Ag over 42 metres. Drill hole S06-40 intersected 0.505% Cu and 0.534 g/t Au over 84 metres, including 18 metres averaging 1.081% Cu and 1.185 g/t Au. Drill hole S06-40 is located 311 metres southwest of S06-42. The drilling area is approximately 445 metres by 500 metres in size.

Drill holes S06-36 to S06-41 intersected mineralization consisting of disseminated, porphyry-style copper mineralization which exhibits relatively consistent grade, hosted by quartz-feldspar porphyry. These drill holes contain intervals ranging from 14 -160 metres of copper mineralization. The average grade of the mineralized intervals range from 0.191 – 0.505% Cu, and gold values averaged 0.163 – 0.534 g/t gold.. At present, this zone is open to the south

Location Map: Gold Reach Resources Ltd. - Seel Claims - Drill Locations Map

Drill holes S06-42 to S06-47 intersected the Seel breccia, believed to be a breccia pipe consisting of fragments of intrusive and hornfelsed volcanics with pyrite marcasite, chalcopyrite, sphalerite, tetrahedrite, and minor galena; the sulphides occur as infilling with quartz and siderite around the breccia fragments. These drill holes expand the lateral dimensions of the Seel breccia, and sections of Seel breccia encountered in drill holes S06-37 and S06-38 expand it to depth. However, the chalcopyrite is erratically distributed and controlled primarily by the size of open spaces between fragments. Assay results from drill hole S06-42 contained nineteen 2-metre samples that were over 1% Cu, six samples greater than 2% Cu, and one greater than 3% Cu, over the 138 metres of mineralization intersected. The Seel breccia is open to the north and west, and has been noted to occur at other locations on the property by previous workers. There is a good correlation of silver values with copper mineralization in the Seel breccia, and the soil samples appear to indicate that silver is a good pathfinder element that can be used to locate additional areas of Seel breccia.

Location Map: Gold Reach Resources Ltd. - Seel Claims - Drill Locations Map

Approximately 4000 metres of drilling is planned for early in 2007, in order to expand on both the Cu-Au and Cu-Mo porphyry mineralization, and the Seel breccia. Drill targets have been indicated by soil geochemical surveys, geophysics anomalies, and early prospecting.

Gold Reach has received results from 15 of 15 drill holes and please note that the overall grade of hole 40 has increased due to over limit assays:

DDH	from	to	INTERVAL	Cu %	Au 	Ag	Mo%			
	m	m	m		g/t	g/t S06-33	230	238	8	0.134						
	190	280	90				0.007			
S06-34	no significant intersections							
S06-35	16	32	16		0.351	1.8		1.910 g/t Au over 2m interval
	142	152	10	0.078						
and	158	172	14				0.019			
S06-36	80	104	24	0.147						
and	174	188	14	0.194		4.0				
S06-37	39.6	160	120.4	0.243	0.277					
incl.	39.6	72	32.4	0.365	0.314 and	216	238	22	0.258		14.5				
S06-38	35.66	100	64.34	0.400	0.435 incl.	35.66	76	40.34	0.477	0.541 and	156	180	24	0.323	0.225	5.3				
S06-39	44	204	160	0.430	0.503	1.7				
incl.	44	174	130	0.456	0.532	1.8				
S06-40	36	120	84	0.505	0.534 incl.	36	100	64	0.599	0.639 incl.	36	54	18	1.081	1.186 S06-41	46	120	74	0.191	0.163					
S06-42	22	160	138	0.845 23.0 incl.	22	64	42	1.240	0.130	32.0 S06-43	no significant intersections							
S06-44	72	96	24	0.264		8.1				
S06-45	30	48	18	0.103		2.4				
S06-46	34	48	14	0.105		3.2				
S06-47	106	144	38	0.301		10.8				
incl.	106	132	26	0.420 13.7 incl.	106	120	14	0.704		21.7 

Assaying Procedures

The diamond drill holes were drilled NQ diameter and half-core samples were sent to the Assayers Canada Labs preparation facility in Telkwa, B.C., and then to Vancouver, B.C., for analysis. All samples underwent multi-element analysis by ICP/MS and wet geochem for gold. A QAQC (quality assurance, quality control) program conducted by Gold Reach consisted of the introduction of duplicate and blank samples into the sample sequence at semi-regular intervals. Samples were subjected to aqua regia digestion and analyzed for 32 elements using the induced coupled plasma (ICP) method. Atomic absorption was used to determine copper values exceeding 10,000 ppm. Gold was analyzed by fire assay with atomic absorption finish using a 15g pulverized sample.

The in-house qualified person responsible for the projects is Barbara Welsh, P. Eng., VP of Exploration. The contents of this press release were reviewed and approved by Conrad Swanson, President of Gold Reach Resources.

At the completion of the last drill program a total of 47 holes (10,000 metres to date) have been drilled on the Seel Property by the Company with the vast majority of the holes intersecting widths of mineralization. Gold Reach Resources holds a 90% interest in the Seel Property with Consolidated Abaddon Resources holding the remaining 10%.

ON BEHALF OF THE BOARD OF DIRECTORS

Conrad Swanson, President

For further information, please contact:

Doug Kerr
Gold Reach Resources
Telephone: 604-718-5454
Toll Free 888-500-4587
Facsimile: 604-646-2054
Email: doug@goldreachresources.com
Web: www.goldreachresources.com